Unpacking the storage facility and verifying the ship group is complete

Procedure

  1. Remove the CE Unpacking Instructions from the Customer Engineer envelope that is taped to the front of the storage facility below the CEC enclosures.
    Use them to unpack and prepare each rack for installation.
  2. Verify that all items in the ship group were received.
    1. The ship group comes in one or more large boxes on pallets. The customer may not allow the pallet and large box in their machine room. The ship group parts may need to be removed from the pallet and placed in a staging location.
    2. If an expansion rack is included, the decorative covers that go between the racks are packed in the large ship group box.
    3. The hardcopy listing of the ship group contents is shipped loose with the other parts inside the large boxes. If it is missing, check if it was accidentally discarded along with the pallets and large boxes. An additional copy of the paperwork may be included in the CE Envelope.
    4. The official ship group listing of parts is included in the ship group.
  3. Place the ship group parts list in the document enclosure (front upper left of rack 1). This list can be used for future removal of the storage facility.
  4. Go to the next section.