A backplane or a connection to the backplane might be failing.
Use this procedure to identify which backplane might be failing.
Before you begin
Note: Storage complex repair actions must always be managed from the
management console. To replace any FRUs identified in this procedure, use . If the FRUs are listed in
this or another Serviceable Event, select them from there.
About this task
Before replacing any parts, verify the connections to the backplane.
Procedure
- Were you sent here by a power reference code (1xxxxxxx)?
- Yes, go to SYSBKPL. This
ends the procedure.
- No, continue with the next step.
- Determine the location of the failing FRU by performing the following:
- Use the location information in the service event, if it is
available.
- If no location information is available, call your next level
of support.
This ends the procedure.