BEBxxxxx
This section lists the BEBxxxxx system reference codes.
If the SRC listed in a serviceable event
is missing from the following table, ask your next level of support
for assistance.
Note: Next level, inform development of any SRCs not
defined in the table.
| System Reference Code | Description |
|---|---|
| BEB00010 | On-Demand Data Collection (General PE package). |
| BEB00011 | Moved un-selected General PE pkg OR Customer UI pkg files to Virtual Retain. |
| BEB00012 | Individual file offload(HMC/LPAR) |
| BEB00013 | On-Demand Data Collection (PE Package by Area/Condition) |
| BEB00014 | On-Demand Data Collection (Customer User Interface data package) |
| BEB00018 | Automatic Data Collection (General PE package). |
| BEB00019 | Weekly Data Collection (General PE package). |
| BEB00020 | End-to-End Communication Test |
| BEB00030 | PDISK/DDM statesave without automatically sending call home data. |
| BEB00031 | Enclosure statesave without automatically sending call home data. |
| BEB00032 | CPSS statesave without automatically sending call home data. |
| BEB00033 | ISS DA statesave without automatically sending call home data. |
| BEB00034 | All data packages including Customer UI data and General PE packages. |
| BEB00035 | ODD dump without automatically sending call home data. |
| BEB00036 | Lightweight ODD dump without automatically sending call home data. |
| System Reference Code | Description |
|---|---|
| BEB10010 | Network Surveillance NIC_FAILURE: Single HMC physical link unavailable on Ethernet port eth0 or eth3. The network is unknown. |
| BEB10011 | Network Surveillance NIC_FAILURE: Single HMC physical link unavailable on ethernet port - eth0 (172.16-BLACK network)1 |
| BEB10012 | Network Surveillance NIC_FAILURE: Single HMC physical link unavailable on ethernet port - eth3 (172.17-GRAY network)1 |
| BEB10013 | Network Surveillance: Ethernet cables missing or swapped. |
| BEB10014 | Network Surveillance NIC_FAILURE: Single HMC physical link unavailable on Ethernet port - eth0 on the USB adapter (172.16-BLACK network). |
| BEB10015 | Network Surveillance NIC_FAILURE: Single HMC physical link unavailable on Ethernet port - eth3 on the USB adapter (172.17-GRAY network). |
| BEB10020 | Network Surveillance LINK_FSP_HMC: Single HMC lost link to single FSP. The network is unknown. |
| BEB10021 | Network Surveillance LINK_FSP_HMC: Single HMC lost link to single FSP over 172.16-BLACK network1 |
| BEB10022 | Network Surveillance LINK_FSP_HMC: Single HMC lost link to single FSP over 172.17-GRAY network1 |
| BEB10030 | Network Surveillance LINK_PART_HMC: Single HMC lost link to single partition on a system; both paths are not available. |
| BEB10040 | Network Surveillance LINK_PART_HMC_REDUND: Single HMC lost link to single partition on a system of the two networks, only one is available. The network is unknown. |
| BEB10041 | Network Surveillance LINK_PART_HMC_REDUND: Single HMC lost link to single partition on a system, the path through the 172.16-BLACK network1 is not available, the other network is OK. |
| BEB10042 | Network Surveillance LINK_PART_HMC_REDUND: Single HMC lost link to single partition on a system, the path through the 172.17-GRAY network1 is not available, the other network is OK. |
| BEB10050 | Network Surveillance LINK_M_PART_HMC: Single HMC lost links to multiple partitions on single system; both paths are not available; FSP to HMC link is still working. |
| BEB10060 | Network Surveillance LINK_A_PART_HMC: Single HMC lost links to all partitions on single system; both paths are not available; FSP to HMC link is still working. |
| BEB10070 | Network Surveillance LINK_ALL_HMC: Single HMC lost links to single system (partition and FSP); both paths are not available. |
| BEB10080 | Network Surveillance LINK_HMC_SYS: Single HMC lost links to all systems (FSP and partition); both paths are not available. |
| BEB10090 | HMC to service processor function communication might have been interrupted. |
| BEB10100 | Network Surveillance LINK_HMC_HMC: Lost HMC to HMC links; both paths are not available. |
| BEB10110 | Network Surveillance LINK_HMC_HMC_REDUND |
| BEB10120 | Network Surveillance LINK_HMC_M_HMC: Lost single HMC to HMC link; only one path is not available. |
| BEB10130 | Network Surveillance LINK_HMC_ALL: Lost HMC link to multiple HMC's; both paths are not available (n/a for MM) |
| BEB10140 | Network Surveillance M_LINK_HMC_SYS: Multiple HMCs lost all links to a single system (FSP and partition) |
| BEB10150 | Network Surveillance M_LINK_HMC_M_SYS: Multiple HMCs lost all links to multiple systems (FSP and partition) |
| BEB10160 | Network Surveillance M_LINK_HMC_ALL: Multiple HMCs lost all links to all systems (FSP and partition) |
| BEB10200 | Ethernet port failure detected. |
| BEB10301 | Network Surveillance: Ethernet switch SW1 (Black network) failed. |
| BEB10302 | Network Surveillance: Ethernet switch SW2 (Gray network) failed. |
| 1 - The default address range is shown, but the customer might have selected to use one of three optional address ranges. To find out which address range was selected, see MAP7005 Determining which private network address range is selected. | |
| System Reference Code | Description |
|---|---|
| BEB20010 | Call Home Test. |
| BEB20011 | Informational Message - Customer notification and call home of warmstart recovery process. |
| BEB20012 | On Demand Data dump initiated by DS8000 Microcode. |
| BEB20013 | Informational Message - Customer notification and call home of quickstart recovery process. |
| BEB20014 | Informational Message - Customer notification and call home of warmstart recovery process due to hardware event. |
| BEB20015 | Informational Message - Customer notification and call home of warmstart recovery process due to data collection event. |
| BEB20016 | Informational Message - Customer notification and call home of warmstart recovery process due to microcode event. |
| BEB20020 | Connection Established. |
| BEB20021 | Secure IBM® service connection established. |
| BEB20022 | Secure IBM service connection dropped. |
| BEB20030 | VPN Call Back Failed. |
| BEB21000 | Backup critical data failed. |
| BEB21001 | LPAR configuration data failed to be backed up. |
| BEB21002 | The management console was rebuilt or transformed (upgraded) after CSM was updated by the customer. To restore configuration backups, the latest Copy Services Manager (CSM) version must be reinstalled on the management console. Required version = version. Installed version = version. |
| BEB25001 | Customer initiated request |
| System Reference Code | Description |
|---|---|
| BEB30001 | HMC health check: HMC FileSystem size check failed. |
| BEB30002 | HMC health check: ESSNI Server state check failed. |
| BEB30003 | HMC health check: DS8000 Storage manager server state check failed. |
| BEB30004 | HMC health check: PHYP SRC check failed. |
| BEB30005 | HMC health check: Verification of HMC Peer Domain failed. |
| BEB30006 | HMC health check: Check to verify if Large file transfer is enabled failed. |
| BEB30007 | HMC health check: HMC management domain verification failed. |
| BEB30008 | HMC health check: Check to verify LPARs running from HMC failed. |
| BEB30009 | HMC health check: Verification of management console memory configuration failed. |
| BEB30010 | HMC health check: Verification of ResourceManagers on LPAR failed. |
| BEB30011 | HMC health check: Verification of RMC objects on LPAR failed. |
| BEB30012 | HMC health check: Verification of storage facility power on/off option failed. |
| BEB30013 | HMC health check: Verification of CPSS availability on LPARs failed. |
| BEB30014 | HMC health check: Verification of power components failed. |
| BEB30015 | HMC health check: Verification of DA load state failed. |
| BEB30016 | HMC health check: Verification of pinned data on LPARs failed. |
| BEB30017 | HMC health check: No disk in HMC DVD drive or DVD write check failed. |
| BEB30018 | HMC health check: logrotate.status file size is 0. Will cause PA failure. |
| BEB30019 | HMC health check: Base system command failed. |
| BEB30020 | HMC health check: Verification of service locks failed. |
| BEB30021 | HMC health check: Verification of HMC Peer Node failed. |
| BEB30022 | HMC health check: Verification of resource managers on HMC failed. |
| BEB30023 | HMC health check: Verification of HMC VPD failed. |
| BEB30024 | HMC health check: Verification of RMC objects(StorageFacility) failed. |
| BEB30025 | HMC health check: Verification of RMC objects(SystemPartition) failed. |
| BEB30026 | HMC health check: Verification of storage facility power off option failed. |
| BEB30027 | HMC health check: Verification of RIO loop failed. |
| BEB30028 | HMC health check: Verification of power supplies failed. |
| BEB30029 | HMC health check: Failed to query HMC laptop external cooling fans status (verifyFanStatus) |
| BEB30030 | HMC health check: Verification of software PID expiration date failed. |