MES and installation instructions location codes (Models 984, 84E, 985, 85E, 986, 86E)

Physical location codes are used in the MES and installation instructions. To determine the physical location code for a part, refer to the appropriate figure in Table 1.

Note: Locations shown here are for standard models (machine types 283x and 9581). For all-flash models, refer to MES and installation instructions location codes (all-flash models 984, 985, 85E, 986, 86E, 988, 88E).

Table 1. Physical location codes for parts
Rack	Refer to:
Rack-1, 2 (Models 985, 85E) Storage enclosure (12 and 24 DDM slots) High-performance flash enclosure (24 flash/SSD slots) I/O enclosure	Figure 1 and Figure 2
Rack-3, 4, 5 (Model 85E) Storage enclosure (12 and 24 DDM slots)	Figure 1 and Figure 2
Rack-1, 2 (Models 986, 86E) Storage enclosure (12 and 24 DDM slots) High-performance flash enclosure (24 flash/SSD slots) I/O enclosure	Figure 3 and Figure 4
Rack-3, 4, 5 (Model 86E) Storage enclosure (12 and 24 DDM slots)	Figure 3 and Figure 4
Rack-1, 2 (Models 984, 84E) Storage enclosure (12 and 24 DDM slots) High-performance flash enclosure (24 flash/SSD slots) I/O enclosure	Figure 5 and Figure 6
Rack-3 (Model 84E) Storage enclosure (12 and 24 DDM slots)	Figure 5 and Figure 6

Figure 1. Rack 1-5 storage enclosure and I/O enclosure location codes (single-phase Models 985, 85E) (front view)

Figure 2. Rack 1-5 storage enclosure and I/O enclosure location codes (single-phase Models 985, 85E) (rear view)

Figure 3. Rack 1-5 storage enclosure and I/O enclosure location codes (three-phase Models 986, 86E) (front view)

Figure 4. Rack 1-5 storage enclosure and I/O enclosure location codes (three-phase Models 986, 86E) (rear view)

Figure 5. Rack 1-3 storage enclosure and I/O enclosure location codes (Models 984, 84E) (front view)

Figure 6. Rack 1-3 storage enclosure and I/O enclosure location codes (Models 984, 84E) (rear view)