MAP1260 Displaying the storage facility image (SFI) state

Use this MAP to display the SFI state to ensure the LPARs are ready for customer use.

MAP1260 Section-1

Procedure

Display the partition activation state for each LPAR on a storage facility image.
Note: States of the CEC enclosure partitions (LPARs).
  1. From the navigation area, click Storage Facility Management > storage facility > SF image.
  2. From the bottom Task area, click Service Utilities > Change/Show SFI State.
    Figure 1. Window: SFI Server's Control
    Window: SFI Server's Control