Range 0x00xx

This section lists the codes in the 0x00xx range regarding connection related failures during runtime.

Table 1. Range 0x00xx: Connection related failures during runtime (after initial command sequencing is complete)
Error code Message Recovery action
0x0000 Connecting None.
0x0001 Connecting
  1. If the management console does not recover automatically within a few minutes, go to MAP6600 Resetting the managed system connection from the management console.
  2. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.
0x0002 Connecting
  1. If the management console does not recover automatically within a few minutes, go to MAP6600 Resetting the managed system connection from the management console.
  2. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.
0x0003 Connecting A reset connection of the managed system was initiated on the management console. If the management console does not recover automatically within a few minutes, contact your next level of support.
Note: The managed system should not stay in this state for long. The management console will re-establish connection to the system, and transition to some other state.
0x0004 Temporary disconnection None.
0x0005 Permanent disconnection None.
0x0006 Forced disconnection Contact your next level of support.
0x0007 Connecting.
  1. If the management console does not recover automatically within a few minutes, go to MAP6600 Resetting the managed system connection from the management console.
  2. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.
0x0008 Duplicate IP.
  1. There is another managed system with the same IP address. Check whether there is an IP conflict. See MAP6610 Checking for an IP address conflict.
  2. Reset the managed system connection from the management console. Go to MAP6600 Resetting the managed system connection from the management console.
  3. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.
0x00FF Connecting.
  1. Reset the managed system connection from the management console. Go to MAP6600 Resetting the managed system connection from the management console.
  2. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.