Range 0x08xx

This section lists the codes in the 0x08xx range.

Table 1. Range 0x08xx: Authentication related connection failures
Error code Message Recovery action
0x0801 Authentication timed out.
  1. Reset the managed system connection from the management console. Go to MAP6600 Resetting the managed system connection from the management console.
  2. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.
0x0802 Incorrect password. The password entered for the managed system is not correct. See MAP66B0 Password management for details.
0x0803 Firmware password locked.
  1. There have been too many unsuccessful login attempts to the same managed system and the password is locked. Wait for five minutes, and reset the connection from the management console. Go to MAP6600 Resetting the managed system connection from the management console.
  2. If the problem persists, contact your next level of support.
0x08FF Connecting.
  1. If the management console does not recover automatically within a few minutes, reset the managed system connection from the management console. Go to MAP6600 Resetting the managed system connection from the management console.
  2. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.