Range 0x10xx

This section lists the codes in the 0x10xx range.

Table 1. Range 0x10xx: Get interface implementation limits related connection failures
Error code Message Recovery action
0x1001 Command timed out.
  1. If the management console does not recover automatically within a few minutes, reset the managed system connection from the management consolemanagement console. Go to MAP6600 Resetting the managed system connection from the management console.
  2. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.
0x10FF Connecting
  1. If the management console does not recover automatically within a few minutes, reset the managed system connection from the management console. Go to MAP6600 Resetting the managed system connection from the management console.
  2. If the managed system is still showing No Connection on the management console, go to MAP7000 Entry point For storage facility private network problems.