FSPSP09
A problem has been detected with a memory DIMM, but it cannot be isolated to a specific memory DIMM.
Before you begin
Note: Storage complex repair actions must always be managed from the
management console. To replace any FRUs identified in this procedure, use . If the FRUs are listed in
this or another Serviceable Event, select them from there.
Procedure
- Using the FRU called out after this procedure, replace ALL the memory DIMMs that reside on the same CEC enclosure system processor card.
- Perform a slow boot after replacing each memory DIMM. See MAP4820 Performing a slow boot of a CEC enclosure.